BUFFALO
SHOWROOM
763-682-5950

ELK RIVER SHOWROOM
DJS CUSTOM CABINETS

763-421-5313

6060 LABEAUX AVENUE ALBERTVILLE, MN 55301
LOCAL 763-497-2661     OUTSTATE 1-800-428-1431  

OSSEO SHOWROOM
763-493-2355


WAYZATA SHOWROOM

952-473-7300

 ABOUT US    ADS   CLEARANCE   CONTACTS   DJS CARES!   FINANCING   INSTALL/SERVICE   REBATES   SHIPPING   PARTS
LOCATIONS & HOURS      PHOTOS
        E-MAIL DJS@DJSONLINE.COM      PRODUCT PAGE        DIRECTIONS

   

Applications where the Crown Royal Outdoor Furnace Could be Used

Outdoor Burning Furnaces at DJS!

Crown Royal Stoves
Stainless Steel

Wood   -    Coal    -    Corn


Typical Crown Royal Installations:  The hot water system can be used to melt snow and ice from driveways and
sidewalks.  Hot water is pumped through tubing under the concrete which radiates heat, melting the snow and ice.

Hot Water Heater:  The domestic water line connects to a heat exchanger on the Crown Royal Stove.  The pressure on the
supply lines force water through the heat exchanger when you open a hot water faucet inside your home.  This provides
hot water for all your household needs and dramatically decreases your hot water cost.

Dairies & Shops: The Crown Royal can provide hot water for your dairy and shop use.  The preheated water can heat
your shop by a Hydronic or a forced air system.

Swimming Pools: Heating your pool can become effortless and economical by including the optional swimming pool kit.
This kit includes a pool pump, pool thermostat, and a low limit sensor.

Forced Air Systems:  A hot water heating coil can be installed on the supply side of your new or existing hot air duct.
A thermostat regulates the heat and performs two functions:  When heat is required, the thermostat sends a signal to the
pump to circulate the hot water and to the blow to turn on the forced air fan.  Your existing furnace can serve as a backup
heating source.

Hydronic System: The Crown Royal can be connected to any new or existing boiler heating system operating at 180 degrees
fahrenheit or less.  The existing pump, zone valves and baseboard heaters can be used to provide heat.  The existing boiler
system can serve as as backup heating source.

Radiant Floor Heating: The Crown Royal can be used to supply the necessary hot water which is circulated throughout
tubing inside the concrete or wood floor construction.  The system temperature can be controlled on a room-by-room basis
with strategically placed thermostats.

Fan Coil Unit: Homes without existing ductwork can enjoy the advantages of Crown Royal heat.  The fan coil can be located
central to the areas to be heated.  Air forced across the hot water coil sends hot air into the area.  The temperature of your home
is regulated by a thermostat mounted on an electrical outlet adjacent to the unit.

Green Houses:  The stove will keep a steady temperature needed for green houses all year round.  Green Houses require large
amounts of heat and your Crown Royal will provide that heat economically.

 

Send E-Mail to djs@djsonline.com with questions or comments about this web site.  Site Map
Last modified: May 13, 2008