KVAR ENERGY CONTROLLER The KVAR Unit is an electromagnetic pollution control system.  The KVAR Unit reduces the amount of non-productive current in your electric system which means a significant reduction in power costs.  The KVAR Unit will reduce demand at the meter by reducing lost and wasted power and will reduce maintenance costs while it increases equipment life. UL and CSA approved.  COMMERCIAL      RESIDENTIAL      INDUSTRIAL   HOOK UP TO SAVE MONEY    HOOK UP TO SAVE ENERGY CLIENTS UTILIZING THE KVAR ENERGY CONTROLLER HAVE REALIZED SAVINGS OF 8% TO 20% ON THEIR ANNUAL ELECTRIC EXPENSE HOW DOES IT WORK? 5 YEAR WARRANTY

KVAR Energy Controller Units are designed to provide significant savings on electric bills
and provide motor and/or panel surge protection.  KVAR units use methods employed at
large industrial complexes - now reduced to a compact unit - to reclaim and recycle
electrical energy.  The application has benefits to both the user and the supplier of
electrical power.

KVAR® KEC Energy Saver Product Recognition Recognized by World Leading Energy Conservation Organizations: •NASA     •RoHs Certified •UL Listed and CSA Approved

HOW DOES THE KVAR UNIT WORK?
POWER FACTOR (PF) DESCRIBES ELECTRICAL EFFICIENCY; AND AN IMPROVEMENT IN PF EQUALS LESS WASTED ELECTRICITY. THE KVAR ENERGY CONTROLLER OPTIMIZES PF BY REDUCING THE AMOUNT OF REACTIVE POWER (KVAR) THAT THE MOTORS IN YOUR HOME DRAW FROM THE UTILITY COMPANY.  KVAR ENERGY CONTROLLERS STORE THE REACTIVE POWER (KVAR )NEEDED TO CREATE THE ELECTRO-MAGNETIC FORCE REQUIRED TO RUN ALL THE SMALL ELECTRIC MOTORS IN TODAY'SAVERAGE HOME.  AS EACH MOTOR OPERATES, THIS REACTIVE POWER IS SUPPLIED LOCALLY AS IT'S "PUSHED" AND "PULLED" TO AND FROM THE KVAR UNIT BY THE MOTOR.  THUS: THROUGH PF OPTIMIZATION, THE QUANTITY OF REACTIVE POWER REQUIRED TO BE PURCHASED FROM THE UTILITY COMPANY IS GREATLY REDUCED; PERHAPS EVEN ELIMINATED.

INSTALLATION INFORMATION

1. HANG KVAR UNIT ON WALL
2. TAKE PANEL COVER OFF AND EITHER DRILL A 7/8" HOLE IN CORNER OR POP OUT A ROUND HOLE.
3. TURN OFF TOP 220/240 BREAKER
4. CONNECT THE GREEN WIRE TO GROUNDING BAR
5. LOOSEN TWO SCREWS UNDER BREAKER
6. SLIP THE TWO RED WIRES UNDER THE TWO SCREWS AND TIGHTEN. (THESE RED WIRES ARE IN THE ABOVE DIAGRAM CONNECTED TO THE BREAKER 30 AMP MAX.
7. TURN BREAKER BACK ON AND REPLACE COVER
8. RED LIGHT SHOULD BE LIT ON KVAR UNIT.  WE RECOMMEND A LICENSE ELECTRICIAN INSTALL THE UNIT.

HOW DOES THE KVAR UNIT SAVE YOU MONEY?
THE KVAR UNIT CAUSES LESS WASTE OF ELECTRICAL ENERGY WHILE INCREASING THE LIFE OF THE INDUCTIVE EQUIPMENT.  THE KVAR UNIT PROTECTS AGAINST LIGHTNING SURGES AND INCREASES THE CAPACITY TO THE ELECTRICAL PANEL BY MAKING IT RUN COOLER.  ALL THIS MEANS EXTRA $$$ IN YOUR POCKET.

PRICING:
- KVAR 200 AMP MODEL INSTALLED IN THE TWIN CITIES AREA INCLUDING ELECTRICAL $499.00
** MUST PROVIDE ELECTRICAL PANEL BRAND NAME - HOW MANY OPEN SLOTS IN THE ELECTRICAL PANEL ARE AVAILABLE - MUST HAVE A 20 AMP BREAKER SPOT AVAILABLE.   

HUMAN IMPACT:
THE ENERGY SOURCES THAT PROPEL MODERN INDUSTRIAL SOCIETIES ALSO FUEL OUR CURRENT CONCERNS REGARDING
THE IMPACT OF OUR HUMAN ACTIVITIES ON PLANET EARH.  FOSSIL FUELS - OIL, COAL AND NATURAL GAS - ACCOUNT FOR 80% OF THE EXTRA CO2 THAT NOW HOLDS MORE HEAT IN THE ATMOSPHERE.  MOST OF THE REST OF THE CO2 COMES FROM LAND USE CHANGES, PRIMARILY IN TROPICAL FORESTS, INCLUDING SLASH-AND-BURN AGRICULTURE AND TIMBER HARVESTING.

**Savings on energy will vary by location, amount of inductive equipment, line losses,
and how your electric company bills you.
 

Send E-Mail to djs@djsonline.com with questions or comments about this web site.
Last modified: May 13, 2008