A Quick Guide to Starting Your Spa with a Bromine Program.  Need Chlorine?
 

Spa maintenance is absolutely essential.  Why? Because it keeps spa water soft and soothing, extends the life of spa surfaces, fights bacteria, protects equipment, and prevents future problems.

You can depend on DJ'S to be the best source of reliable information, quality products and service.

Bromine Program:

First Time Start-up

1. Fill spa with water

2. Superoxidize the spa with Brominating Concentrate with spa circulation turned on.

3. Operate for at least 2 hours.

4. Drain then rinse interior surfaces and refill.

Refill Guide

1. As spa is filling, add SpaGuard Stain and Scale Control.

2. Once spa is filled, start equipment following manufacturer's directions.  Apply SpaGuard Water Clarifier and circulate water for 5 minutes.

3. Use SpaGuard Spa Sentry following the recommendations on your Water Analysis (DJ'S will have a Water Analysis tester coming soon.)

4. Apply SpaGuard Brominating Concentrate following label directions.

5. Add SpaGuard Natural Spa Enzyme once a bromine residual of 3 - 6 ppm is established.

Daily Care

• Test the bromine level.  Apply Brominating Concentrate as needed to maintain proper residual.

 Weekly Care

• Test the pH. Proper range is 7.2 - 7.6

• Apply SpaGuard Natural Enzyme and Stain and Scale Control following label directions.

• Shock your spa with SpaGuard Enhanced Shock or superoxidize with Brominating Concentrate.

Monthly Care

• Apply 1 quart of SpaGuard Spa Sentry per label instructions. 

Every 3 to 4 Months

• Drain, clean, polish and refill based on usage.

Back to the SpaGuard Chemicals

Send E-Mail to djs@djsonline.com with questions or comments about this website.
April 28, 2008 Last modified:  Site Map