Push Button Control

           The Venmar Lighted Push Button is a low voltage, remote mounted control which provides 20 minutes of high speed operation.  After that time, a double arrow light at the top of the control will go out and the VENMAR unit will return to the setting previously selected by the homeowner.  This control can be used with all VENMAR models.  Three color-coded, 22 gauge (or larger) wires make the connection from the lighted push button to the terminal block inside the electrical box on the outside of the VENMAR unit.  Each terminal is labeled I, OC, OL.  It is critical that the same color wire is attached to the same position at each end.  For example: red to I, blue top OC, black to OL.  The lighted push button requires a standard single gang electrical box, and by code must be independent of any line voltage controls.

Located on the face of the VENMAR Lighted Push Button is a "house" in the middle of the control, a "house with two arrows" on top of the control and the VENMAR logo at the bottom of the control.  Following is a brief description of the operational features of this wall control.

 Retail Price $18.00 Per Push Button

   Back to the Solo Air Exchanger Page                                         Back to the Duo Air Exchanger Page 

Send E-Mail to djs@djsonline.com with questions or comments about this web site.
Last modified: January 20, 2006